Vinyl flooring is an affordable and practical option for homeowners looking to update their floors. Whether you want to install vinyl planks, hiring professionals is the best way to get the job done right.
When choosing a contractor to install your new vinyl floors, it’s important to find one that’s licensed and insured. Additionally, ask about any warranties they offer to cover their work.
Vinyl flooring installers use a variety of methods to install the vinyl floors they sell. Each method has its advantages and disadvantages, so it’s important to choose the one that’s best for your project.
Glue-down is the most common installation method for luxury vinyl flooring (LVT). This method uses adhesive to bond LVT to the subfloor, making it a great option for high-traffic areas. It also allows for more permanent installations and is easier to replace individual planks if they’re damaged.
Direct glue installation is another popular option, and it’s usually the preferred choice for commercial spaces. It involves a special adhesive that bonds LVT to an approved substrate. This installation method is usually more time-consuming, but it can save you money in the long run if you need to redo your floors on a regular basis.
For glue-down, be sure to follow the manufacturer’s instructions carefully and use a clean, dry surface to apply the adhesive. The adhesive should be cured before you move any furniture back to the new floor.
Once the adhesive is dry, it’s time to place your planks or tiles on the underlayment. This step is important to ensure that the planks are securely locked in place. Using a roller to roll over the underlayer and the planks is a good way to ensure that they’re secure.
Next, you’ll want to prepare the space for your new vinyl flooring. You need to remove any existing trim or molding in the area and trim the door jamb so your planks will fit seamlessly. You’ll also need to make sure the subfloor is properly prepared for your new vinyl flooring.
When you’re ready to start laying your new vinyl, get out a notched trowel and some vinyl flooring adhesive. Spread some of the adhesives across the underlayer in a section of the room, then work your way to the other side. You’ll need to leave some time for the adhesive to set, so don’t rush the process and work in sections.
Before starting to lay the vinyl, it’s important to figure out which direction the planks should run. This can depend on the size and shape of the room, as well as any natural or electrical light sources. You can also consider your personal preferences, such as whether you want to run your vinyl planks along a wall or in the same direction as a window.
It’s also important to take into account any other special features in the room, such as a fireplace or a TV. Putting your vinyl flooring in the direction that’s most likely to receive natural or electrical light can help the room feel larger and more open.
Once you’ve finished installing your new vinyl, you can expect it to take about 72 hours for it to acclimate to your home’s temperature. This is important because it helps prevent your new vinyl from buckling and warping. During this time, avoid any heavy traffic, and clean the area according to your manufacturer’s instructions.
Underlayment is a key piece of any vinyl flooring installation. It is used to ensure that your new flooring remains flat and level, as well as to protect your floor against moisture, heat, and noise. It can be purchased in rolls or sheet form and is usually available in a variety of thicknesses.
It’s a good idea to shop around for the best underlayment to match your flooring type. Many different types of underlayments are available, and they differ in R-value, acoustic performance, and thermal insulation.
Generally, it’s recommended to choose an underlayment with a higher R-value than the flooring you plan to install. Underlayments with higher R-values can help keep your floors warmer during the winter and cooler during the summer.
A common type of underlayment is plywood. Plywood is made from wood and can be used with a number of different types of subfloors. It is especially recommended for laminate flooring, as it can fill minor voids in the floor’s subfloor and help your flooring float on top of the subfloor.
Another commonly used type of underlayment is foam. It can be a good choice for hardwood floors and engineered wood, as it can provide excellent noise reduction. It is also ideal for tile and carpet floors, as it can prevent cracks in the tiles caused by house settling or natural movement.
Foam underlayments can also be useful for insulating your floor from heat or cold, depending on the climate of your home. A high-R-value underlayment is typically preferred for those with underfloor heating systems, as it can provide additional insulation.
The underlayment is often placed on the top of the underlying subfloor before installing the floor covering. This allows it to fill a small gap between the underlying subfloor and the flooring material, smoothing out imperfections such as barely protruding screw heads or small knot holes.
A self-leveling underlayment is also a good option for those installing laminate and vinyl flooring over concrete subfloors. It can be poured over low spots that are deeper than 1” and provides a solid surface for the flooring to rest on. It is also a good way to protect your flooring from damage caused by water.
Lastly, rubber underlayments can be an excellent choice for laminate flooring as they offer outstanding sound-absorbing and thermal insulation properties. They’re also eco-friendly and easy to install.
When choosing an underlayment, make sure it has an R-value of at least 2. A low R-value means less insulation, while a high R-value can be used to help keep hot air out during the summer and warm air in during the winter.
If you’re installing a vinyl floor in a commercial building, underlayment is usually required to meet local acoustic requirements and provide additional acoustic insulation. A high-R-value underlayment can also be used to increase the lifespan of your flooring by reducing the amount of maintenance it needs.
Vinyl floors are an excellent choice for homeowners looking to add value and style to their homes. They are durable, easy to clean, and scuff-resistant. The installation process is also quick and affordable.
When installing a new floor, you need to make sure your subfloor is prepared properly. This includes removing any waxes or sealers and making sure it is smooth.
Preparation is the single most important step in a successful flooring installation. It can take over 70% of an installer’s time, but it will pay off by ensuring the finished product looks great and performs well.
Regardless of the type of vinyl flooring you choose, a proper underlayment will help ensure that your new floor is as durable as possible. Different underlayments are recommended for specific applications, so it’s important to follow the manufacturer’s instructions carefully.
You’ll want to lay down a moisture barrier underlayment to protect your subfloor and make it more comfortable to walk on. This will prevent moisture from seeping through the seams between your vinyl planks, which can lead to permanent damage.
Underlayments are available for a variety of materials, including foam, plywood, cork, felt, and particleboard. It’s best to refer to the manufacturers’ guidelines and use a high-quality underlayment designed specifically for your type of vinyl.
Once the underlayment is installed, it’s time to lay down the vinyl floor itself. You’ll need to cut the sheets to fit around protrusions like door jambs and skirting boards.
To start, remove any trim molding that will be in the way of your flooring, if applicable. This will save you a lot of work and headaches down the road.
Next, you’ll need to mark the floor’s layout. This is usually done with a straight edge and compass. This template will be used to guide the flooring in a consistent way throughout the room.
As you work, don’t forget to cut the edges of your vinyl sheets as needed. This will make them look neater and more uniform.
When you cut the sheets, remember to cut slowly and make small cuts at a time. This will help you avoid taking off too much of the sheet at once, which can be difficult to do when you’re trying to get it into place.
If the floor is slanted, you may need to use a leveling hammer or a tape measure to keep your cuts even. This will ensure that your vinyl flooring is perfectly level and that it will look great when it’s complete.